Monitor
- We track the overall consumption of your building and of each connected appliance
- We track the electricity you produce
- A real-time dashboard: who consumes what and when, your self-consumption rate, monthly peak and excessive consumption
Energy monitoring & self-consumption
See where your electricity goes. Use more of your own.
CleverPowr measures your consumption and on-site production in real time, then automates your appliances so they run when your own production is available. You buy less grid power and avoid costly consumption peaks.
Homes, businesses & apartment buildingsInstalled by a qualified electricianYour data stays yours
Same day, same consumption
Example
On-site production
Consumption
Production used on site
23.8 kWhproduced on site
16%65%of it used on site (16% without)
21.8 kWh10.3 kWhbought from the grid (21.8 without)
4.7 kW3.0 kWhighest peak (4.7 without)
The problem
Your bill tells you how much. It never tells you why, or who.
1
One number a year
The annual bill shows a total. It doesn't show which appliance, which hour or which habit drives the cost.
2
Surplus sold back cheap
Production rarely matches consumption hour by hour. Whatever you don't use on the spot is injected into the grid for a fraction of what you pay to buy it back.
3
Peaks cost money
Where a capacity tariff applies, as in Flanders, your highest 15-minute peak each month weighs on the bill. A heat pump, an EV charger and an oven running together can set it.
4
Hidden consumers
Old freezers, standby equipment, compressors running at night: the biggest savings often come from loads nobody knew about.
What we do
Monitor, control, optimize
We install proven home-automation hardware around your meter and main appliances, and turn the data into savings.
Control
- Control your connected appliances remotely, from your phone or computer
- Heat pump, boiler, EV charger, machines: start, stop or adjust them in a few taps
- Take back control at any time, even while an automation is running
Optimize
- Automations that start the boiler, EV charging or heat pump when your own production is available
- Load shifting to keep your monthly peak under control
- Concrete recommendations: which equipment to replace, which contract suits you
How it works
From first form to first savings
1You · 10 minutes
Free energy check
Fill in a short online form about your meter, contract, production and main appliances. Add a recent bill if you have one.
2Us · on site
Audit
We check the electrical board, the meter and the equipment, then propose the right set of sensors and automations.
3Partner electrician
Installation
A qualified electrician installs the hardware safely and to standard. We configure the platform and your dashboard.
4Us · continuously
Monitor
We track your consumption, production and monthly peak, and alert you to anything abnormal.
5Together · ongoing
Optimize
After a few weeks of data, we fine-tune the automations and review the results with you.
Solutions
One approach, three kinds of buildings
Get the most out of your own production
- Run the boiler, heat pump and EV charging on your own production
- See what each appliance really costs
- Keep the capacity-tariff peak low
Turn energy into a managed cost
- Consumption per machine, zone or site
- Detect night-time and weekend waste
- Figures ready for your energy or ESG reporting
Share the common areas' bill fairly
- Track elevators, lighting, ventilation and pumps
- Optimize a shared production installation
- Transparent reports for the general assembly
Why CleverPowr
Built to last
Proven, standard technology
We use proven, standard hardware from recognized brands.
Privacy by design
Energy data reveals how you live and work. We collect only what the service needs and store it securely in the EU.
Safe, professional installation
All work on your electrical installation is carried out by a qualified partner electrician.
Independent advice
We don't sell electricity or production equipment. Our only goal is to help you use less grid power and more of your own.
FAQ
Common questions
Does it work with my meter?
Digital meters with a P1 port give the best results, with live data every second. Older meters can be equipped with a clamp sensor in the electrical board. We confirm it during the audit.
Is it useful without on-site production?
Yes. Monitoring alone reveals waste and hidden consumers, and helps you keep the monthly peak low. And if you plan to invest in production or storage, you'll size it on real data.
What happens to my data?
Your data is stored securely in the EU and used only to deliver the service. You can export or delete it at any time.
Will the automations disturb my comfort or my operations?
No. We define the rules together: minimum temperatures, charging deadlines, machines that must never be interrupted. You can override any automation manually.
How long does installation take?
For a home, usually half a day. For businesses and apartment buildings it depends on the number of circuits to monitor; we give you a schedule with the quote.
What if I stop the service?
The hardware remains yours. When the subscription ends, monitoring, control and optimization stop. Before that, you can export your data; it is then deleted within 90 days.
Find out what you could save
Ready?
Answer a few questions about your installation. We'll get back to you to plan an audit.
Start optimizingAbout 10 minutes · no commitment
Not yet?
Everything about CleverPowr in four pages, with example scenarios.
Download the brochurePDF · 4 pages